![]() |
Project
|
#include "GPUSettingsTypes.h"Go to the source code of this file.
Functions | |
| BeginNamespace (o2::gpu) BeginSubConfig(GPUSettingsRecTPC | |
| configStandalone Reconstruction rec_tpc | AddOptionRTC (rejectQPtB5, float, 1.f/0.050f, "", 0, "QPt threshold to reject clusters of TPC tracks (Inverse Pt, scaled to B=0.5T!!!)") AddOptionRTC(hitPickUpFactor |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following | AddOptionRTC (hitSearchArea2, float, 2.f, "", 0, "square of maximum search road of hits during seeding") AddOptionRTC(neighboursSearchArea |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx | AddOptionRTC (clustersShiftTimebins, float, 0, "", 0, "Shift of TPC clusters (applied during CTF cluster decoding)") AddOptionRTC(clustersShiftTimebinsClusterizer |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC | clusters (applied during CTF clusterization)") AddOptionRTC(clustersEdgeFixDistance |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this | parameter (fixed during CTF decoding)") AddOptionRTC(defaultZOffsetOverR |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius | AddOptionRTC (PID_EKrangeMin, float, 0.47f, "", 0, "min P of electron/K BB bands crossing") AddOptionRTC(PID_EKrangeMax |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing | AddOptionRTC (PID_EPrangeMin, float, 0.93f, "", 0, "min P of electron/p BB bands crossing") AddOptionRTC(PID_EPrangeMax |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing | AddOptionRTC (PID_EDrangeMin, float, 1.88f, "", 0, "min P of electron/d BB bands crossing") AddOptionRTC(PID_EDrangeMax |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing | AddOptionRTC (PID_ETrangeMin, float, 2.84f, "", 0, "min P of electron/t BB bands crossing") AddOptionRTC(PID_ETrangeMax |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing | AddOptionRTC (PID_sigma, float, 0.06f, "", 0, "relative sigma for PID in combination with PID_useNsigma") AddOptionRTC(minTrackdEdxMax |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track | AddOptionRTC (minTrackdEdxMax2Tot, float, 0.67f, "", 0, "min accepted dEdxMaxTPC/dEdxTotTPC of the track") AddOptionRTC(extraClusterErrorEdgeY2 |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set | AddOptionRTC (extraClusterErrorEdgeZ2, float, 0.15f, "", 0, "Additive extra cluster error for Z2 if edge flag set") AddOptionRTC(extraClusterErrorSingleY2 |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set | AddOptionRTC (extraClusterErrorSingleZ2, float, 0.04f, "", 0, "Additive extra cluster error for Z2 if single set") AddOptionRTC(extraClusterErrorSplitPadSharedSingleY2 |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set | AddOptionRTC (extraClusterErrorFactorSplitPadSharedSingleY2, float, 3.0f, "", 0, "Multiplicative extra cluster error for Y2 if splitpad, shared, or single set") AddOptionRTC(extraClusterErrorSplitTimeSharedSingleZ2 |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set | AddOptionRTC (extraClusterErrorFactorSplitTimeSharedSingleZ2, float, 3.0f, "", 0, "Multiplicative extra cluster error for Z2 if splittime, shared, or single set") AddOptionArray(errorsCECrossing |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing | AddOptionRTC (extrapolationTrackingYRangeUpper, float, 0.85f, "", 0, "Inner portion of y-range in sector that is not used in searching for extrapolated track candidates") AddOptionRTC(extrapolationTrackingYRangeLower |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates | AddOptionRTC (trackFollowingYFactor, float, 4.f, "", 0, "Weight of y residual vs z residual in tracklet constructor") AddOptionRTC(trackMergerFactor2YS |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging | AddOptionRTC (trackMergerFactor2ZT, float, 1.5f *1.5f, "", 0, "factor2ZT for track merging") AddOptionRTC(trackMergerFactor2K |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging | AddOptionRTC (trackMergerFactor2General, float, 3.5f *3.5f, "", 0, "General factor for track merging") AddOptionRTC(rejectEdgeClustersMargin |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y | AddOptionRTC (rejectEdgeClustersSigmaMargin, float, 0.f, "", 0, "Margin factor for trackSigmaY when rejecting edge clusters based on uncorrected track Y") AddOptionRTC(trackletMaxSharedFraction |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet | AddOptionRTC (trackletMinSharedNormFactor, float, 0.f, "", 0, "Max shared defined as trackletMinSharedNormFactor*max(current_nhits,trackletMinSharedNormFactor*minHits,1)") AddOptionRTC(maxTimeBinAboveThresholdIn1000Bin |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this | baseline (disable=0)") AddOptionRTC(maxConsecTimeBinAboveThreshold |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad | AddOptionRTC (hipTailFilter, uint8_t, 0, "", 0, "Enable Highly Ionising Particle tail filter in CheckPadBaseline (0 = disable, 1 = filter tails)") AddOptionRTC(hipTailFilterMinimum |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated | AddOptionRTC (hipTailFilterThreshold, uint16_t, 100, "", 0, "Threshold that must be exceeded for a timebin to be counted towards Highly Ionising Particle tail") AddOptionRTC(hipTailFilterAlpha |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter | AddOptionRTC (occupancyMapTimeBins, uint16_t, 16, "", 0, "Number of timebins per histogram bin of occupancy map (0 = disable occupancy map)") AddOptionRTC(occupancyMapTimeBinsAverage |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging | AddOptionRTC (trackFitCovLimit, uint16_t, 1000, "", 0, "Abort fit when y/z cov exceed the limit") AddOptionRTC(addErrorsCECrossing |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of | AddOptionRTC (cfEdgeTwoPads, uint8_t, 0, "", 0, "Flag clusters with peak on the 2 pads closes to the sector edge as edge cluster") AddOptionRTC(nWays |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of | merger (must be odd to end with inward fit)") AddOptionRTC(trackFitRejectMode |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF | AddOptionRTC (mergerNonInterpolateRejectMinNDF, uint8_t, 5, "", 0, "Minimum NDF of track for non-interpolated reject (both for chi2 and absolute distance)") AddOptionRTC(mergeCE |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode | AddOptionRTC (retryRefit, int8_t, 1, "", 0, "Retry refit with seeding errors and without cluster rejection when fit fails (=2 means retry in same kernel, =1 for separate kernel") AddOptionRTC(enablePID |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response | AddOptionRTC (PID_useNsigma, int8_t, 1, "", 0, "Use nSigma instead of absolute distance in PID response") AddOptionRTC(adddEdxSubThresholdClusters |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation | AddOptionRTC (dEdxClusterRejectionFlagMask, int8_t, o2::gpu::GPUTPCGMMergedTrackHit::flagEdge, "", 0, "OR mask of TPC flags that will reject the cluster in dEdx") AddOptionRTC(dEdxClusterRejectionFlagMaskAlt |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx | AddOptionRTC (rejectEdgeClustersInSeeding, int8_t, 0, "", 0, "Reject edge clusters based on uncorrected track Y during seeding") AddOptionRTC(rejectEdgeClustersInTrackFit |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit | AddOptionRTC (tubeExtraProtectMinRow, uint8_t, 20, "", 0, "Increase Protection, decrease removal by factor 2, when below this row") AddOptionRTC(tubeExtraProtectEdgePads |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge | AddOptionArray (PID_remap, int8_t, 9,(0, 1, 2, 3, 4, 5, 6, 7, 8), "", 0, "Remap Ipid to PID_reamp[Ipid] (no remap if<0)") AddHelp("help" |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h | EndConfig () BeginSubConfig(GPUSettingsRecTRD |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd | AddOptionRTC (minTrackPt, float,.5f, "", 0, "Min Pt for tracks to be propagated through the TRD") AddOptionRTC(maxChi2 |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track | AddOptionRTC (penaltyChi2, float, 12.f, "", 0, "Chi2 penalty for no available TRD tracklet (effective chi2 cut value)") AddOptionRTC(chi2StrictCut |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode | AddOptionRTC (chi2SeparationCut, float, 2.5f, "", 0, "Minimum difference between chi2 of winner match and chi2 of second best match") AddOptionRTC(nSigmaTerrITSTPC |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate | AddOptionRTC (addTimeRoadITSTPC, float, 2.5f, "", 0, "Increase time search road by X us for ITS-TPC tracks") AddOptionRTC(extraRoadY |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm | AddOptionRTC (extraRoadZ, float, 10.f, "", 0, "Addition to search road around track prolongation along Z in cm") AddOptionRTC(trkltResRPhiIdeal |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in | cm (in case phi of track=lorentz angle)") AddOptionRTC(trkltResVsTanPhiMisalign |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in | tan (phi) dependence of tracklet error due to radial misalignment(centered at 0 angle)") AddOptionRTC(maxChi2Red |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks | AddOptionRTC (applyDeflectionCut, uint8_t, 0, "", 0, "Set to 1 to enable tracklet selection based on deflection") AddOptionRTC(addDeflectionInChi2 |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails | AddOptionRTC (stopTrkAfterNMissLy, uint8_t, 6, "", 0, "Abandon track following after N layers without a TRD match") AddOptionRTC(nTrackletsMin |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking | AddOptionRTC (matCorrType, uint8_t, 2, "", 0, "Material correction to use: 0 - none, 1 - TGeo, 2 - matLUT") AddOptionRTC(pileupFwdNBC |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs | AddOptionRTC (pileupBwdNBC, uint8_t, 130, "", 0, "Pre-trigger Pile-up integration time in BCs") AddOptionRTC(useAngularPull |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections | AddOptionRTC (fitPropagateBzOnly, int8_t, -1, "", 0, "Propagate using Bz only for n passes") AddOptionRTC(useMatLUT |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit | AddOptionRTC (trackingRefitGPUModel, int8_t, 1, "", 0, "Use GPU track model for the Global Track Refit") AddOptionRTC(enableCyclicGraphWorkarounds |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed | AddCustomCPP (void SetMinTrackPtB5(float v) { maxTrackQPtB5=v > 0.001f ?(1.f/v) :(1.f/0.001f);}) AddSubConfig(GPUSettingsRecTPC |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc | AddSubConfig (GPUSettingsRecTRD, trd) AddSubConfig(GPUSettingsRecDynamic |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn | AddHelp ("help", 'h') EndConfig() BeginSubConfig(GPUSettingsProcessingRTC |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc | AddOption (cacheOutput, bool, false, "", 0, "Cache RTC compilation results") AddOption(optConstexpr |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define | AddOption (compilePerKernel, bool, true, "", 0, "Run one RTC compilation per kernel") AddOption(enable |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code | AddOption (overrideWarpSize, int32_t, -1, "", 0, "Override the warp size to be used for RTC") AddHelp("help" |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech | AddOption (runTest, int32_t, 0, "", 0, "Do not run the actual benchmark, but just test RTC compilation (1 full test, 2 test only compilation)") AddOption(cacheMutex |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder | AddOption (ignoreCacheValid, bool, false, "", 0, "If set, allows to use RTC cached code files even if they are not valid for the current source code / parameters (loads cache files without hash suffix)") AddOption(printLaunchBounds |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after | def (1)) AddOption(allowOptimizedSlaveReconstruction |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode | AddOption (cacheFolder, std::string, "./rtccache/", "", 0, "Folder in which the cache file is stored") AddOption(cacheSize |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are | removed (0=no limit)") AddOption(prependCommand |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string | AddOption (overrideArchitecture, std::string, "", "", 0, "Override arhcitecture part of RTC compilation command line") AddOption(loadLaunchBoundsFromFile |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file | AddOption (keepTempFiles, bool, false, "", 0, "Keep temporary source and object files") AddHelp("help" |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param | AddOptionArray (tpcErrorParamY, float, 4,(0.06f, 0.24f, 0.12f, 0.1f), "", 0, "TPC Cluster Y Error Parameterization") AddOptionArray(tpcErrorParamZ |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization | AddOption (tpcTriggerHandling, bool, true, "", 0, "Enable TPC trigger handling") AddHelp("help" |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network proc_nn | AddOption (applyNNclusterizer, int32_t, 0, "", 0, "(bool, default = 0), if the neural network clusterizer should be used") AddOption(nnInferenceDevice |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network proc_nn std::string Specify inference | device (cpu(default), rocm, cuda)") AddOption(nnInferenceDeviceId |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network proc_nn std::string Specify inference uint32_t Specify inference device id | AddOption (nnInferenceAllocateDevMem, int32_t, 0, "", 0, "(bool, default = 0), if the device memory should be allocated for inference") AddOption(nnInferenceInputDType |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network proc_nn std::string Specify inference uint32_t Specify inference device id std::string Specify the datatype for which inference is | performed (FP32:default, fp16)") AddOption(nnInferenceOutputDType |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network proc_nn std::string Specify inference uint32_t Specify inference device id std::string Specify the datatype for which inference is std::string Specify the datatype for which inference is | performed (fp32:default, fp16)") AddOption(nnInferenceIntraOpNumThreads |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network proc_nn std::string Specify inference uint32_t Specify inference device id std::string Specify the datatype for which inference is std::string Specify the datatype for which inference is Number of threads used to evaluate one neural | network (ONNX:SetIntraOpNumThreads). 0 |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network proc_nn std::string Specify inference uint32_t Specify inference device id std::string Specify the datatype for which inference is std::string Specify the datatype for which inference is Number of threads used to evaluate one neural can lead to problems on SLURM systems | AddOption (nnInferenceInterOpNumThreads, int32_t, 1, "", 0, "Number of threads used to evaluate one neural network (ONNX: SetInterOpNumThreads). 0 = auto-detect, can lead to problems on SLURM systems") AddOption(nnInferenceEnableOrtOptimization |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network proc_nn std::string Specify inference uint32_t Specify inference device id std::string Specify the datatype for which inference is std::string Specify the datatype for which inference is Number of threads used to evaluate one neural can lead to problems on SLURM systems Enables graph optimizations in ONNX Runtime Can be[0, 1, 2, 99] see Enables deterministic compute in ONNX Runtime were possible Can be[0, 1] see Enables profiling of model execution in ONNX Runtime | AddOption (nnInferenceOrtProfilingPath, std::string, ".", "", 0, "If nnInferenceOrtProfiling is set, the path to store the profiling data") AddOption(nnInferenceVerbosity |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network proc_nn std::string Specify inference uint32_t Specify inference device id std::string Specify the datatype for which inference is std::string Specify the datatype for which inference is Number of threads used to evaluate one neural can lead to problems on SLURM systems Enables graph optimizations in ONNX Runtime Can be[0, 1, 2, 99] see Enables deterministic compute in ONNX Runtime were possible Can be[0, 1] see Enables profiling of model execution in ONNX Runtime should be appended to the input | AddOption (nnClusterizerSizeInputRow, int32_t, 3, "", 0, "Size of the input to the NN (currently calculated as (length-1)/2") AddOption(nnClusterizerSizeInputPad |
Variables | |
| tpc | |
| configStandalone | rec |
| configStandalone | RECTPC |
| configStandalone Reconstruction | settings |
| configStandalone Reconstruction rec_tpc | float |
| configStandalone Reconstruction rec_tpc | f |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of | neighbours |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if | searchWindowDZDR |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by | factor |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC | If |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary | tracks |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if | splitpad |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if | shared |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if | splittime |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing | CE |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet | uint16_t |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered | saturated |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging | uint8_t |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of | int8_t |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase | Protection |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h | trd |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone | RECTRD |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks | TODO |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs | and |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge | graphs |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn | rtc |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone | proc |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone | RTC |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc | bool |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc | true |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions | false |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic | mode |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h | rtctech |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone | RTCTECH |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder | int32_t |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging | option |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after | printing |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode | uint32_t |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache | folder |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h | param |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone | PARAM |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h | nn |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone | NN |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network | clusterizer |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network proc_nn | CPU |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network proc_nn std::string Specify inference uint32_t Specify inference device id | FP32 |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network proc_nn std::string Specify inference uint32_t Specify inference device id std::string Specify the datatype for which inference is std::string Specify the datatype for which inference is Number of threads used to evaluate one neural can lead to problems on SLURM systems Enables graph optimizations in ONNX Runtime Can be[0, 1, 2, 99] see | https |
Definition in file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed AddCustomCPP | ( | void SetMinTrackPtB5(float v) { maxTrackQPtB5=v > 0.001f ?(1.f/v) :(1.f/0.001f);} | ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn AddHelp | ( | "help" | , |
| 'h' | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network proc_nn AddOption | ( | applyNNclusterizer | , |
| int32_t | , | ||
| 0 | , | ||
| "" | , | ||
| 0 | , | ||
| " | bool, default = 0, | ||
| if the neural network clusterizer should be used" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode AddOption | ( | cacheFolder | , |
| std::string | , | ||
| "./rtccache/" | , | ||
| "" | , | ||
| 0 | , | ||
| "Folder in which the cache file is stored" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc AddOption | ( | cacheOutput | , |
| bool | , | ||
| false | , | ||
| "" | , | ||
| 0 | , | ||
| "Cache RTC compilation results" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define AddOption | ( | compilePerKernel | , |
| bool | , | ||
| true | , | ||
| "" | , | ||
| 0 | , | ||
| "Run one RTC compilation per kernel" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder AddOption | ( | ignoreCacheValid | , |
| bool | , | ||
| false | , | ||
| "" | , | ||
| 0 | , | ||
| "If | set, | ||
| allows to use RTC cached code files even if they are not valid for the current source code/parameters(loads cache files without hash suffix)" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file AddOption | ( | keepTempFiles | , |
| bool | , | ||
| false | , | ||
| "" | , | ||
| 0 | , | ||
| "Keep temporary source and object files" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network proc_nn std::string Specify inference uint32_t Specify inference device id std::string Specify the datatype for which inference is std::string Specify the datatype for which inference is Number of threads used to evaluate one neural can lead to problems on SLURM systems Enables graph optimizations in ONNX Runtime Can be[0, 1, 2, 99] see Enables deterministic compute in ONNX Runtime were possible Can be[0, 1] see Enables profiling of model execution in ONNX Runtime should be appended to the input AddOption | ( | nnClusterizerSizeInputRow | , |
| int32_t | , | ||
| 3 | , | ||
| "" | , | ||
| 0 | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network proc_nn std::string Specify inference uint32_t Specify inference device id AddOption | ( | nnInferenceAllocateDevMem | , |
| int32_t | , | ||
| 0 | , | ||
| "" | , | ||
| 0 | , | ||
| " | bool, default = 0, | ||
| if the device memory should be allocated for inference" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network proc_nn std::string Specify inference uint32_t Specify inference device id std::string Specify the datatype for which inference is std::string Specify the datatype for which inference is Number of threads used to evaluate one neural can lead to problems on SLURM systems AddOption | ( | nnInferenceInterOpNumThreads | , |
| int32_t | , | ||
| 1 | , | ||
| "" | , | ||
| 0 | , | ||
| "Number of threads used to evaluate one neural network (ONNX: SetInterOpNumThreads). | 0 = auto-detect, |
||
| can lead to problems on SLURM systems" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network proc_nn std::string Specify inference uint32_t Specify inference device id std::string Specify the datatype for which inference is std::string Specify the datatype for which inference is Number of threads used to evaluate one neural can lead to problems on SLURM systems Enables graph optimizations in ONNX Runtime Can be[0, 1, 2, 99] see Enables deterministic compute in ONNX Runtime were possible Can be[0, 1] see Enables profiling of model execution in ONNX Runtime AddOption | ( | nnInferenceOrtProfilingPath | , |
| std::string | , | ||
| "." | , | ||
| "" | , | ||
| 0 | , | ||
| "If nnInferenceOrtProfiling is | set, | ||
| the path to store the profiling data" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string AddOption | ( | overrideArchitecture | , |
| std::string | , | ||
| "" | , | ||
| "" | , | ||
| 0 | , | ||
| "Override arhcitecture part of RTC compilation command line" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code AddOption | ( | overrideWarpSize | , |
| int32_t | , | ||
| - | 1, | ||
| "" | , | ||
| 0 | , | ||
| "Override the warp size to be used for RTC" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech AddOption | ( | runTest | , |
| int32_t | , | ||
| 0 | , | ||
| "" | , | ||
| 0 | , | ||
| "Do not run the actual | benchmark, | ||
| but just test RTC compilation(1 full test, 2 test only compilation)" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization AddOption | ( | tpcTriggerHandling | , |
| bool | , | ||
| true | , | ||
| "" | , | ||
| 0 | , | ||
| "Enable TPC trigger handling" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge AddOptionArray | ( | PID_remap | , |
| int8_t | , | ||
| 9 | , | ||
| (0, 1, 2, 3, 4, 5, 6, 7, 8) | , | ||
| "" | , | ||
| 0 | , | ||
| "Remap Ipid to PID_reamp (no remap if<0)" | [Ipid] | ||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param AddOptionArray | ( | tpcErrorParamY | , |
| float | , | ||
| 4 | , | ||
| (0.06f, 0.24f, 0.12f, 0.1f) | , | ||
| "" | , | ||
| 0 | , | ||
| "TPC Cluster Y Error Parameterization" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate AddOptionRTC | ( | addTimeRoadITSTPC | , |
| float | , | ||
| 2. | 5f, | ||
| "" | , | ||
| 0 | , | ||
| "Increase time search road by X us for ITS-TPC tracks" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks AddOptionRTC | ( | applyDeflectionCut | , |
| uint8_t | , | ||
| 0 | , | ||
| "" | , | ||
| 0 | , | ||
| "Set to 1 to enable tracklet selection based on deflection" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of AddOptionRTC | ( | cfEdgeTwoPads | , |
| uint8_t | , | ||
| 0 | , | ||
| "" | , | ||
| 0 | , | ||
| "Flag clusters with peak on the 2 pads closes to the sector edge as edge cluster" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode AddOptionRTC | ( | chi2SeparationCut | , |
| float | , | ||
| 2. | 5f, | ||
| "" | , | ||
| 0 | , | ||
| "Minimum difference between chi2 of winner match and chi2 of second best match" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx AddOptionRTC | ( | clustersShiftTimebins | , |
| float | , | ||
| 0 | , | ||
| "" | , | ||
| 0 | , | ||
| "Shift of TPC clusters (applied during CTF cluster decoding)" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation AddOptionRTC | ( | dEdxClusterRejectionFlagMask | , |
| int8_t | , | ||
| o2::gpu::GPUTPCGMMergedTrackHit::flagEdge | , | ||
| "" | , | ||
| 0 | , | ||
| "OR mask of TPC flags that will reject the cluster in dEdx" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set AddOptionRTC | ( | extraClusterErrorEdgeZ2 | , |
| float | , | ||
| 0. | 15f, | ||
| "" | , | ||
| 0 | , | ||
| "Additive extra cluster error for Z2 if edge flag set" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set AddOptionRTC | ( | extraClusterErrorFactorSplitPadSharedSingleY2 | , |
| float | , | ||
| 3. | 0f, | ||
| "" | , | ||
| 0 | , | ||
| "Multiplicative extra cluster error for Y2 if | splitpad, | ||
| shared | , | ||
| or single set" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set AddOptionRTC | ( | extraClusterErrorFactorSplitTimeSharedSingleZ2 | , |
| float | , | ||
| 3. | 0f, | ||
| "" | , | ||
| 0 | , | ||
| "Multiplicative extra cluster error for Z2 if | splittime, | ||
| shared | , | ||
| or single set" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set AddOptionRTC | ( | extraClusterErrorSingleZ2 | , |
| float | , | ||
| 0. | 04f, | ||
| "" | , | ||
| 0 | , | ||
| "Additive extra cluster error for Z2 if single set" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing AddOptionRTC | ( | extrapolationTrackingYRangeUpper | , |
| float | , | ||
| 0. | 85f, | ||
| "" | , | ||
| 0 | , | ||
| "Inner portion of y-range in sector that is not used in searching for extrapolated track candidates" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm AddOptionRTC | ( | extraRoadZ | , |
| float | , | ||
| 10. | f, | ||
| "" | , | ||
| 0 | , | ||
| "Addition to search road around track prolongation along Z in cm" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections AddOptionRTC | ( | fitPropagateBzOnly | , |
| int8_t | , | ||
| - | 1, | ||
| "" | , | ||
| 0 | , | ||
| "Propagate using Bz only for n passes" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad AddOptionRTC | ( | hipTailFilter | , |
| uint8_t | , | ||
| 0 | , | ||
| "" | , | ||
| 0 | , | ||
| "Enable Highly Ionising Particle tail filter in CheckPadBaseline (0 = disable, 1 = filter tails)" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated AddOptionRTC | ( | hipTailFilterThreshold | , |
| uint16_t | , | ||
| 100 | , | ||
| "" | , | ||
| 0 | , | ||
| "Threshold that must be exceeded for a timebin to be counted towards Highly Ionising Particle tail" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following AddOptionRTC | ( | hitSearchArea2 | , |
| float | , | ||
| 2. | f, | ||
| "" | , | ||
| 0 | , | ||
| "square of maximum search road of hits during seeding" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking AddOptionRTC | ( | matCorrType | , |
| uint8_t | , | ||
| 2 | , | ||
| "" | , | ||
| 0 | , | ||
| "Material correction to use: 0 - | none, | ||
| 1 - | TGeo, | ||
| 2 - matLUT" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF AddOptionRTC | ( | mergerNonInterpolateRejectMinNDF | , |
| uint8_t | , | ||
| 5 | , | ||
| "" | , | ||
| 0 | , | ||
| "Minimum NDF of track for non-interpolated reject (both for chi2 and absolute distance)" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track AddOptionRTC | ( | minTrackdEdxMax2Tot | , |
| float | , | ||
| 0. | 67f, | ||
| "" | , | ||
| 0 | , | ||
| "min accepted dEdxMaxTPC/dEdxTotTPC of the track" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd AddOptionRTC | ( | minTrackPt | , |
| float | , | ||
| . | 5f, | ||
| "" | , | ||
| 0 | , | ||
| "Min Pt for tracks to be propagated through the TRD" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter AddOptionRTC | ( | occupancyMapTimeBins | , |
| uint16_t | , | ||
| 16 | , | ||
| "" | , | ||
| 0 | , | ||
| "Number of timebins per histogram bin of occupancy map (0 = disable occupancy map)" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track AddOptionRTC | ( | penaltyChi2 | , |
| float | , | ||
| 12. | f, | ||
| "" | , | ||
| 0 | , | ||
| "Chi2 penalty for no available TRD tracklet (effective chi2 cut value)" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing AddOptionRTC | ( | PID_EDrangeMin | , |
| float | , | ||
| 1. | 88f, | ||
| "" | , | ||
| 0 | , | ||
| "min P of electron/d BB bands crossing" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius AddOptionRTC | ( | PID_EKrangeMin | , |
| float | , | ||
| 0. | 47f, | ||
| "" | , | ||
| 0 | , | ||
| "min P of electron/K BB bands crossing" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing AddOptionRTC | ( | PID_EPrangeMin | , |
| float | , | ||
| 0. | 93f, | ||
| "" | , | ||
| 0 | , | ||
| "min P of electron/p BB bands crossing" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing AddOptionRTC | ( | PID_ETrangeMin | , |
| float | , | ||
| 2. | 84f, | ||
| "" | , | ||
| 0 | , | ||
| "min P of electron/t BB bands crossing" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing AddOptionRTC | ( | PID_sigma | , |
| float | , | ||
| 0. | 06f, | ||
| "" | , | ||
| 0 | , | ||
| "relative sigma for PID in combination with PID_useNsigma" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response AddOptionRTC | ( | PID_useNsigma | , |
| int8_t | , | ||
| 1 | , | ||
| "" | , | ||
| 0 | , | ||
| "Use nSigma instead of absolute distance in PID response" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs AddOptionRTC | ( | pileupBwdNBC | , |
| uint8_t | , | ||
| 130 | , | ||
| "" | , | ||
| 0 | , | ||
| "Pre-trigger Pile-up integration time in BCs" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx AddOptionRTC | ( | rejectEdgeClustersInSeeding | , |
| int8_t | , | ||
| 0 | , | ||
| "" | , | ||
| 0 | , | ||
| "Reject edge clusters based on uncorrected track Y during seeding" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y AddOptionRTC | ( | rejectEdgeClustersSigmaMargin | , |
| float | , | ||
| 0. | f, | ||
| "" | , | ||
| 0 | , | ||
| "Margin factor for trackSigmaY when rejecting edge clusters based on uncorrected track Y" | |||
| ) |
| configStandalone Reconstruction rec_tpc AddOptionRTC | ( | rejectQPtB5 | , |
| float | , | ||
| 1.f/0. | 050f, | ||
| "" | , | ||
| 0 | , | ||
| "QPt threshold to reject clusters of TPC tracks (Inverse Pt, scaled to B=0.5T!!!)" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode AddOptionRTC | ( | retryRefit | , |
| int8_t | , | ||
| 1 | , | ||
| "" | , | ||
| 0 | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails AddOptionRTC | ( | stopTrkAfterNMissLy | , |
| uint8_t | , | ||
| 6 | , | ||
| "" | , | ||
| 0 | , | ||
| "Abandon track following after N layers without a TRD match" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging AddOptionRTC | ( | trackFitCovLimit | , |
| uint16_t | , | ||
| 1000 | , | ||
| "" | , | ||
| 0 | , | ||
| "Abort fit when y/z cov exceed the limit" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates AddOptionRTC | ( | trackFollowingYFactor | , |
| float | , | ||
| 4. | f, | ||
| "" | , | ||
| 0 | , | ||
| "Weight of y residual vs z residual in tracklet constructor" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit AddOptionRTC | ( | trackingRefitGPUModel | , |
| int8_t | , | ||
| 1 | , | ||
| "" | , | ||
| 0 | , | ||
| "Use GPU track model for the Global Track Refit" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet AddOptionRTC | ( | trackletMinSharedNormFactor | , |
| float | , | ||
| 0. | f, | ||
| "" | , | ||
| 0 | , | ||
| "Max shared defined as trackletMinSharedNormFactor*max(current_nhits,trackletMinSharedNormFactor*minHits,1)" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging AddOptionRTC | ( | trackMergerFactor2General | , |
| float | , | ||
| 3.5f *3. | 5f, | ||
| "" | , | ||
| 0 | , | ||
| "General factor for track merging" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging AddOptionRTC | ( | trackMergerFactor2ZT | , |
| float | , | ||
| 1.5f *1. | 5f, | ||
| "" | , | ||
| 0 | , | ||
| "factor2ZT for track merging" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit AddOptionRTC | ( | tubeExtraProtectMinRow | , |
| uint8_t | , | ||
| 20 | , | ||
| "" | , | ||
| 0 | , | ||
| "Increase | Protection, | ||
| decrease removal by factor | 2, | ||
| when below this row" | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc AddSubConfig | ( | GPUSettingsRecTRD | , |
| trd | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this baseline | ( | disable | = 0 | ) |
| BeginNamespace | ( | o2::gpu | ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC clusters | ( | applied during CTF | clusterization | ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in cm | ( | in case phi of | track = lorentz angle | ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after def | ( | 1 | ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network proc_nn std::string Specify inference device | ( | cpu(default) | , |
| rocm | , | ||
| cuda | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h EndConfig | ( | ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of merger | ( | must be odd to end with inward | fit | ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network proc_nn std::string Specify inference uint32_t Specify inference device id std::string Specify the datatype for which inference is std::string Specify the datatype for which inference is Number of threads used to evaluate one neural network | ( | ONNX:SetIntraOpNumThreads | ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this parameter | ( | fixed during CTF | decoding | ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network proc_nn std::string Specify inference uint32_t Specify inference device id std::string Specify the datatype for which inference is std::string Specify the datatype for which inference is performed | ( | fp32:default | , |
| fp16 | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network proc_nn std::string Specify inference uint32_t Specify inference device id std::string Specify the datatype for which inference is performed | ( | FP32:default | , |
| fp16 | |||
| ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are removed | ( | 0 | = no limit | ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in tan | ( | phi | ) |
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs and |
Definition at line 191 of file GPUSettingsList.h.
Definition at line 221 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing CE |
Definition at line 93 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network clusterizer |
Definition at line 255 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network proc_nn CPU |
Definition at line 257 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in f |
Definition at line 36 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by factor |
Definition at line 69 of file GPUSettingsList.h.
| configStandalone Light OpenGL display display_light Apply smoothing to points Enable Z buffer Highlight links Highlight seeds Highlight sector tracks Highlight final tracks Show individual Show related Highlight grid Show only individual collision Color clusters belonging to track objects Set line Enable drawing TPC data Enable drawing TOF data Enable drawing magnetic field Set field line step count Invert colors configStandalone Heavy OpenGL display display_heavy Show tracks with ITS contribution Show tracks with TOF contribution Enable propagation of loopers Show clusters at nominal x of pad row for early transformed data Split CE tracks when they cross the central Mark clusters Mark adjacent clusters Hide rejected tracks Apply filter on tracks to be displayed Separate increase X h configStandalone Camera window renderer OpenGL display display_camera Orient the camera such that the y axis is always upwards Full Screen MultiSample Anti Downsampling Anti Enable Vertical Sync Target frame or if the backend cannot limit to the refresh Use OpenGL indirect draws to reduce number of draw calls Display h configStandalone Vulkan display display_vulkan Have uniform buffers in host accessible device memory h configStandalone Internal display display_internal Number of updates the Qt GUI may send ahead of the last one the display has before it waits for the display Opacity of the console background Number of console lines the history is shortened to this when it reaches twice the size Time in seconds an info message fades out after setInfoTime h OpenGL display display Font size false |
Definition at line 223 of file GPUSettingsList.h.
| configStandalone Light OpenGL display display_light Apply smoothing to points Enable Z buffer Highlight links Highlight seeds Highlight sector tracks Highlight final tracks Show individual Show related Highlight grid Show only individual collision Color clusters belonging to track objects Set line Enable drawing TPC data Enable drawing TOF data Enable drawing magnetic field Set field line step count Invert colors configStandalone Heavy OpenGL display display_heavy Show tracks with ITS contribution Show tracks with TOF contribution Enable propagation of loopers Show clusters at nominal x of pad row for early transformed data Split CE tracks when they cross the central Mark clusters Mark adjacent clusters Hide rejected tracks Apply filter on tracks to be displayed Separate increase X h configStandalone Camera window renderer OpenGL display display_camera Orient the camera such that the y axis is always upwards Full Screen MultiSample Anti Downsampling Anti Enable Vertical Sync Target frame or if the backend cannot limit to the refresh Use OpenGL indirect draws to reduce number of draw calls Display h configStandalone Vulkan display display_vulkan Have uniform buffers in host accessible device memory h configStandalone Internal display display_internal Number of updates the Qt GUI may send ahead of the last one the display has before it waits for the display Opacity of the console background Number of console lines the history is shortened to this when it reaches twice the size float |
Definition at line 36 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache folder |
Definition at line 238 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network proc_nn std::string Specify inference uint32_t Specify inference device id std::string Specify the datatype for which inference is FP32 |
Definition at line 260 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge graphs |
Definition at line 209 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network proc_nn std::string Specify inference uint32_t Specify inference device id std::string Specify the datatype for which inference is std::string Specify the datatype for which inference is Number of threads used to evaluate one neural can lead to problems on SLURM systems Enables graph optimizations in ONNX Runtime Can be [0, 1, 2, 99] see Enables deterministic compute in ONNX Runtime were possible Can be [0, 1] see https |
Definition at line 264 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC If |
Definition at line 72 of file GPUSettingsList.h.
| configStandalone Light OpenGL display display_light Apply smoothing to points Enable Z buffer Highlight links Highlight seeds Highlight sector tracks Highlight final tracks Show individual Show related Highlight grid Show only individual collision Color clusters belonging to track objects Set line Enable drawing TPC data Enable drawing TOF data Enable drawing magnetic field Set field line step count Invert colors configStandalone Heavy OpenGL display display_heavy Show tracks with ITS contribution Show tracks with TOF contribution Enable propagation of loopers Show clusters at nominal x of pad row for early transformed data Split CE tracks when they cross the central Mark clusters Mark adjacent clusters Hide rejected tracks Apply filter on tracks to be displayed Separate increase X h configStandalone Camera window renderer OpenGL display display_camera Orient the camera such that the y axis is always upwards Full Screen MultiSample Anti Downsampling Anti Enable Vertical Sync Target frame or if the backend cannot limit to the refresh Use OpenGL indirect draws to reduce number of draw calls Display h configStandalone Vulkan display display_vulkan Have uniform buffers in host accessible device memory h configStandalone Internal display display_internal Number of updates the Qt GUI may send ahead of the last one the display has before it waits for the display Opacity of the console background Number of console lines the history is shortened to this when it reaches twice the size Time in seconds an info message fades out after setInfoTime h OpenGL display display int32_t |
Definition at line 235 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit int8_t |
Definition at line 138 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic mode |
Definition at line 223 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of neighbours |
Definition at line 38 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone NN |
Definition at line 255 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h nn |
Definition at line 255 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging option |
Definition at line 235 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone PARAM |
Definition at line 247 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h param |
Definition at line 247 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after printing |
Definition at line 235 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone proc |
Definition at line 219 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase Protection |
Definition at line 164 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone rec |
Definition at line 34 of file GPUSettingsList.h.
| configStandalone RECTPC |
Definition at line 34 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone RECTRD |
Definition at line 171 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone RTC |
Definition at line 219 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn rtc |
Definition at line 219 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h rtctech |
Definition at line 231 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone RTCTECH |
Definition at line 231 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered saturated |
Definition at line 107 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if searchWindowDZDR |
Definition at line 38 of file GPUSettingsList.h.
| configStandalone Light OpenGL display display_light Apply smoothing to points Enable Z buffer Highlight links Highlight seeds Highlight sector tracks Highlight final tracks Show individual Show related Highlight grid Show only individual collision Color clusters belonging to track objects Set line Enable drawing TPC data Enable drawing TOF data Enable drawing magnetic field Set field line step count Invert colors configStandalone Heavy OpenGL display display_heavy Show tracks with ITS contribution Show tracks with TOF contribution Enable propagation of loopers Show clusters at nominal x of pad row for early transformed data Split CE tracks when they cross the central Mark clusters Mark adjacent clusters Hide rejected tracks Apply filter on tracks to be displayed Separate increase X h configStandalone Camera window renderer OpenGL display display_camera Orient the camera such that the y axis is always upwards Full Screen MultiSample Anti Downsampling Anti Enable Vertical Sync Target frame or if the backend cannot limit to the refresh Use OpenGL indirect draws to reduce number of draw calls Display h configStandalone Vulkan display display_vulkan Have uniform buffers in host accessible device memory h configStandalone Internal display display_internal Number of updates the Qt GUI may send ahead of the last one the display has before it waits for the display Opacity of the console background Number of console lines the history is shortened to this when it reaches twice the size Time in seconds an info message fades out after setInfoTime h OpenGL display settings |
Definition at line 34 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if shared |
Definition at line 89 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if splitpad |
Definition at line 89 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if splittime |
Definition at line 91 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks TODO |
Definition at line 183 of file GPUSettingsList.h.
| tpc |
Definition at line 34 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary tracks |
Definition at line 73 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h trd |
Definition at line 171 of file GPUSettingsList.h.
| configStandalone Light OpenGL display display_light Apply smoothing to points Enable Z buffer Highlight links Highlight seeds Highlight sector tracks Highlight final tracks Show individual Show related Highlight grid Show only individual collision Color clusters belonging to track objects Set line Enable drawing TPC data Enable drawing TOF data Enable drawing magnetic field Set field line step count Invert colors configStandalone Heavy OpenGL display display_heavy Show tracks with ITS contribution Show tracks with TOF contribution Enable propagation of loopers Show clusters at nominal x of pad row for early transformed data Split CE tracks when they cross the central Mark clusters Mark adjacent clusters Hide rejected tracks Apply filter on tracks to be displayed Separate increase X h configStandalone Camera window renderer OpenGL display display_camera Orient the camera such that the y axis is always upwards Full Screen MultiSample Anti Downsampling Anti Enable Vertical Sync Target frame or if the backend cannot limit to the refresh true |
Definition at line 221 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter uint16_t |
Definition at line 105 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs fits all iterations but the last one in projections Use material lookup table for TPC refit Apply workarounds to avoid cyclic merge should not be needed tpc dyn configStandalone Processing proc_rtc Replace constant variables static by constexpr expressions Compile RTC in deterministic with NO_FAST_MATH flags and GPUCA_DETERMINISTIC_MODE define Use RTC to optimize GPU code h configStandalone Processing proc_rtctech Use a file lock to serialize access to the cache folder Print launch bounds used for RTC code as debugging for exit after Allow RTC with slave GPUReconstruction instances with optConstexpr and optSpecialcode Maximum number of RTC cache files per backend in the cache the oldest are Prepend RTC compilation commands by this string Load a parameter object containing the launch bounds from a file h configStandalone Processing proc_param TPC Cluster Z Error Parameterization h configStandalone Processing settings for neural network proc_nn std::string Specify inference uint32_t Specify inference device id std::string Specify the datatype for which inference is std::string Specify the datatype for which inference is Number of threads used to evaluate one neural can lead to problems on SLURM systems uint32_t |
Definition at line 238 of file GPUSettingsList.h.
| configStandalone Reconstruction rec_tpc multiplier for the combined cluster track error during track following area in cm for the search of for z only used if decrease removal by when above this local occupancy rowx Shift of TPC revert cluster flag edge bit distance to edge exceeds this ZOffset for secondary multiple of radius max P of electron K BB bands crossing max P of electron p BB bands crossing max P of electron d BB bands crossing max P of electron t BB bands crossing min accepted dEdxMaxTPC of the track Additive extra cluster error for Y2 if edge flag set Additive extra cluster error for Y2 if single set Additive extra cluster error for Y2 if or single set Additive extra cluster error for Z2 if or single set Extra errors to add to track when crossing depending on addErrorsCECrossing Inner portion of y range in sector that is not used in searching for extrapolated track candidates factor2YS for track merging factor2K for track merging Margin in cm of Y position when rejecting edge clusters based on uncorrected track Y Max fraction of shared clusters for tracklet Except pad from cluster finding if total number of charges in a fragment is above this Except pad from cluster finding if number of consecutive charges in a fragment is above this Threshold where a timebin is considered disabling the noisy pad check for that pad Treat signal above this minimum as saturated Smoothing factor for the exponential Highly Ionising Particle tail filter Number of timebins to use for the averaging Add additional custom track errors when crossing relative as fraction of Do N fit passes in final fit of< 0:reject at max -n hits") AddOptionRTC(rejectIFCLowRadiusCluster, uint8_t, 1, "", 0, "Reject clusters that get the IFC mask error during refit") AddOptionRTC(dEdxTruncLow, uint8_t, 2, "", 0, "Low truncation threshold, fraction of 128") AddOptionRTC(dEdxTruncHigh, uint8_t, 77, "", 0, "High truncation threshold, fraction of 128") AddOptionRTC(extrapolationTracking, int8_t, 1, "", 0, "Enable Extrapolation Tracking(prolong tracks to adjacent sectors to find short segments)") AddOptionRTC(disableRefitAttachment, uint8_t, 0, "", 0, "Bitmask to disable certain attachment steps during refit(1:attachment, 2:propagation, 4:loop following, 8:mirroring)") AddOptionRTC(rejectionStrategy, uint8_t, o2::gpu::GPUSettings::RejectionStrategyA, "", 0, "Enable rejection of TPC clusters for compression(0=no, 1=strategy A, 2=strategy B)") AddOptionRTC(mergeLoopersAfterburner, uint8_t, 1, "", 0, "Run afterburner for additional looper merging") AddOptionRTC(compressionTypeMask, uint8_t, o2::gpu::GPUSettings::CompressionFull, "", 0, "TPC Compression mode bits(1=truncate charge/width LSB, 2=differences, 4=track-model)") AddOptionRTC(compressionSortOrder, uint8_t, o2::gpu::GPUSettings::SortTime, "", 0, "Sort order of TPC compression(0=time, 1=pad, 2=Z-time-pad, 3=Z-pad-time, 4=no sorting(use incoming order))") AddOptionRTC(sigBitsCharge, uint8_t, 4, "", 0, "Number of significant bits for TPC cluster charge in compression mode 1") AddOptionRTC(sigBitsWidth, uint8_t, 3, "", 0, "Number of significant bits for TPC cluster width in compression mode 1") AddOptionRTC(dropLoopers, uint8_t, 0, "", 0, "Drop looping tracks starting from second loop") AddOptionRTC(mergerInterpolateErrors, uint8_t, 1, "", 0, "Use interpolation instead of extrapolation for chi2 based cluster rejection") AddOptionRTC(mergerInterpolateRejectAlsoOnCurrentPosition, uint8_t, 1, "", 0, "When using mergerInterpolateErrors, reject based on chi2 twice computed with interpolated and current track position starting from NDF > mergerNonInterpolateRejectMinNDF Merge tracks accross the central electrode Enable PID response Add sub threshold clusters in TPC dEdx computation OR mask of TPC flags that will reject the cluster in alternative dEdx Reject edge clusters based on uncorrected track Y during track fit Increase decrease removal by when on this number of pads from the edge h configStandalone Reconstruction rec_trd Max chi2 for TRD tracklets to be matched to a track Chi2 cut for strict matching mode Number of sigmas for ITS TPC track time error estimate Addition to search road around track prolongation along Y in cm Optimal tracklet rphi resolution in maximum chi2 per attached tracklet for TRD tracks take into account the full likelihood of the slope including exponential tails Tracks with less attached tracklets are discarded after the tracking Post trigger Pile up integration time in BCs uint8_t |
Definition at line 115 of file GPUSettingsList.h.