Co2::quality_control::core::Activity | Dummy class that should be removed when there is the official one. This corresponds to a Run1/2 "run" |
Co2::quality_control::checker::Aggregator | An aggregator as found in the configuration |
►Co2::quality_control::checker::AggregatorInterface | Skeleton of a quality aggregator user algorithm |
Co2::quality_control::test::SimpleTestAggregator | |
Co2::quality_control_modules::skeleton::SkeletonAggregator | Example QC quality aggregator |
Co2::quality_control::checker::AggregatorRunnerFactory | Factory in charge of creating the AggregatorRunners and their corresponding DataProcessorSpec |
CCcdb.Ccdb | |
Co2::quality_control::checker::Check | The class in charge of providing single check for a given map of MonitorObjects |
Co2::quality_control::checker::CheckConfig | Container for the configuration of a Check or an Aggregator |
►Co2::quality_control::checker::CheckInterface | Skeleton of a check |
Co2::quality_control::test::TestCheck | |
Co2::quality_control_modules::common::EverIncreasingGraph | Check whether a plot is empty or not |
Co2::quality_control_modules::common::MeanIsAbove | Check whether the mean of the plot is above a certain limit |
Co2::quality_control_modules::common::NonEmpty | Check whether a plot is empty or not |
Co2::quality_control_modules::emcal::DigitCheck | Check whether a plot is empty or not |
Co2::quality_control_modules::emcal::RawCheck | EMCAL raw data check It is final because there is no reason to derive from it. Just remove it if needed |
Co2::quality_control_modules::example::FakeCheck | Check whether a plot is empty or not |
Co2::quality_control_modules::ft0::ChannelsCheck | |
Co2::quality_control_modules::ft0::DigitsCheck | |
Co2::quality_control_modules::ft0::MergedTreeCheck | |
Co2::quality_control_modules::its::ITSFhrCheck | Check the sensor occupancy and raw data formatting errors |
Co2::quality_control_modules::mft::BasicClusterQcCheck | MFT Cluster Check |
Co2::quality_control_modules::mft::BasicDigitQcCheck | MFT Digit Check |
Co2::quality_control_modules::mft::BasicTrackQcCheck | MFT Track Check |
Co2::quality_control_modules::mid::RawQcCheck | Count number of digits per detector elements |
Co2::quality_control_modules::muonchambers::PedestalsCheck | Check whether a plot is empty or not |
Co2::quality_control_modules::muonchambers::PhysicsCheck | Check if the occupancy on each pad is between the two specified values |
Co2::quality_control_modules::phos::DigitCheck | Check mos: appearence of dead regions in occupancy plots, mean and RMS etc |
Co2::quality_control_modules::phos::RawCheck | PHOS raw data check It is final because there is no reason to derive from it. Just remove it if needed |
Co2::quality_control_modules::skeleton::SkeletonCheck | Example QC Check |
Co2::quality_control_modules::tof::CheckCompressedData | Checker for the data produced by the TOF compressor (i.e. checking raw data) |
Co2::quality_control_modules::tof::CheckDiagnostics | Checker for diagnostic histogram of TOF Raw data |
Co2::quality_control_modules::tof::CheckRawMultiplicity | Check whether a plot is empty or not |
Co2::quality_control_modules::tof::CheckRawTime | |
Co2::quality_control_modules::tof::CheckRawToT | |
Co2::quality_control_modules::tpc::PIDClusterCheck | Check whether the cluster number for a track is smaller than 159 in PID task |
Co2::quality_control_modules::tpc::TrackClusterCheck | Check whether the cluster number for a track is smaller than 40 or 20 in Track task |
CTestCheck | |
Co2::quality_control::checker::CheckRunnerFactory | Factory in charge of creating DataProcessorSpec of QC CheckRunner |
Co2::quality_control::core::Chunk | |
Co2::quality_control_modules::tof::Counter< size, labels > | Class to count events |
Co2::quality_control_modules::tof::Counter< 2, RDHDiagnosticName > | |
Co2::quality_control_modules::tof::Counter< 32, o2::tof::diagnostic::DRMDiagnosticName > | |
Co2::quality_control_modules::tof::Counter< 32, o2::tof::diagnostic::LTMDiagnosticName > | |
Co2::quality_control_modules::tof::Counter< 32, o2::tof::diagnostic::TRMDiagnosticName > | |
CCRUheader | |
Co2::quality_control::repository::DatabaseFactory | Factory to get a database accessor |
►Co2::quality_control::repository::DatabaseInterface | The interface to the MonitorObject's repository |
Co2::quality_control::repository::CcdbDatabase | |
Co2::quality_control::repository::DummyDatabase | Dummy database which does nothing. Use it to avoid writing to QC repository |
Co2::quality_control::repository::MySqlDatabase | Implementation of the DatabaseInterface for MySQL |
►CDataSamplingCondition | |
Co2::quality_control_modules::example::ExampleCondition | Example of custom Data Sampling Condition |
Co2::quality_control::postprocessing::TrendingTaskConfigITS::DataSource | |
Co2::quality_control::postprocessing::TrendingTaskConfig::DataSource | |
Co2::quality_control_modules::muonchambers::Decoder | Decoding of MCH data |
►CDecoderBase | |
Co2::quality_control_modules::tof::CompressedDataDecoder | TOF Quality Control class for Decoding Compressed data for TOF Compressed data QC Task |
Co2::quality_control_modules::tof::DiagnosticsCounter | TOF Quality Control class for Decoding Compressed data for TOF Compressed data QC Task |
CDigitEvent | |
Co2::quality_control_modules::muonchambers::DualSampa | |
Co2::quality_control_modules::muonchambers::DualSampaGroup | |
Co2::quality_control_modules::ft0::EventWithChannelData | |
►CExceptionBase | |
Co2::quality_control::core::DuplicateObjectError | |
►CFairMQDevice | |
Co2::quality_control::core::DataDumpGui | |
Co2::quality_control::core::RepositoryBenchmark | |
Co2::quality_control_modules::its::ITSFeeTask::GBTDdw::GBTBits | |
Co2::quality_control::core::GUIState | |
►Co2::quality_control_modules::hmpid::HmpidDecoder | |
Co2::quality_control_modules::hmpid::HmpidDecodeRawMem | |
Co2::quality_control_modules::hmpid::HmpidEquipment | |
►CInfoLogger | |
Co2::quality_control::core::QcInfoLogger | Singleton class that any class in the QC can use to log |
Co2::quality_control::core::InfrastructureGenerator | A factory class which can generate QC topologies given a configuration file |
Co2::quality_control_modules::muonchambers::MapCRU | |
Co2::quality_control_modules::muonchambers::MapDualSampa | |
Co2::quality_control_modules::muonchambers::MapDualSampaInv | |
Co2::quality_control_modules::muonchambers::MapFEC | |
Co2::quality_control_modules::muonchambers::MapPad | |
Co2::quality_control_modules::muonchambers::MapSolar | |
Co2::quality_control_modules::muonchambers::MapSolarInv | |
►CMergeInterface | |
Co2::quality_control::core::MonitorObjectCollection | |
Co2::quality_control::core::ObjectsManager | Keeps the list of encapsulated objects to publish and does the actual publication |
CCcdb.ObjectVersion | |
Co2::quality_control_modules::its::ITSFeeTask::GBTDdw::GBTBits::payloadBits | |
Co2::quality_control::postprocessing::TrendingTaskConfigITS::Plot | |
Co2::quality_control::postprocessing::TrendingTaskConfig::Plot | |
►Co2::quality_control::postprocessing::PostProcessingConfig | Post-processing configuration structure |
Co2::quality_control::postprocessing::TrendingTaskConfig | TrendingTask configuration structure |
Co2::quality_control::postprocessing::TrendingTaskConfigITS | TrendingTask configuration structure |
Co2::quality_control::postprocessing::PostProcessingFactory | Factory in charge of creating post-processing tasks |
►Co2::quality_control::postprocessing::PostProcessingInterface | Skeleton of a post-processing task |
Co2::quality_control::postprocessing::TrendingTask | A post-processing task which trends values, stores them in a TTree and produces plots |
Co2::quality_control::postprocessing::TrendingTaskITSFhr | A post-processing task which trends values, stores them in a TTree and produces plots |
Co2::quality_control::postprocessing::TrendingTaskITSThr | A post-processing task which trends values, stores them in a TTree and produces plots |
Co2::quality_control_modules::ft0::TreeReaderPostProcessing | |
Co2::quality_control_modules::skeleton::SkeletonPostProcessing | Example Quality Control Postprocessing Task |
Co2::quality_control_modules::test::TestTask | |
Co2::quality_control_modules::tof::PostProcessDiagnosticPerCrate | Post processing to rearrange TOF information at the level of the crate (maybe we should do the opposite..) |
Co2::quality_control::postprocessing::PostProcessingRunner | A class driving the execution of a post-processing task |
Co2::quality_control::core::Quality | Class representing the quality of a MonitorObject |
►Co2::quality_control::postprocessing::Reductor | An interface for storing data derived from QC objects into a TTree |
CMyReductor | |
Co2::quality_control_modules::common::QualityReductor | A Reductor of QualityObjects, stores a name and level of a Quality |
Co2::quality_control_modules::common::TH1Reductor | A Reductor which obtains the most popular characteristics of TH1 |
Co2::quality_control_modules::common::TH2Reductor | A Reductor which obtains the most popular characteristics of TH2 |
Co2::quality_control_modules::common::THnSparse5Reductor | A Reductor which obtains the most popular characteristics of THnSparse up to 5 dimensions |
Co2::quality_control_modules::emcal::DigitOccupancyReductor | A Reductor which obtains the most popular characteristics of TH2 |
Co2::quality_control_modules::its::TH2XlineReductor | A Reductor which obtains specific characteristics of TH2: mean and stddev of bin contents for each y bin (each row of the TH2) |
Co2::quality_control_modules::muonchambers::TH1MCHReductor | A Reductor which obtains the most popular characteristics of TH1 |
Co2::quality_control_modules::tpc::ROCReductor | A Reductor of ROC, stores mean, standard deviation and median for each ROC |
Co2::quality_control::core::RepoPathUtils | |
CrepoCleaner.Rule | |
►CRuntimeControlledObject | |
CPostProcessingOCCStateMachine | |
CSampa::SampaHeaderStruct | |
Co2::quality_control_modules::muonchambers::SampaHit | |
Co2::quality_control::core::ServiceDiscovery | Information service for QC |
►CTask | |
CClustersRootFileReaderMFT | |
CDigitsRootFileReaderMFT | |
Co2::quality_control::checker::AggregatorRunner | The class in charge of running the aggregators on the QualityObjects |
Co2::quality_control::core::TaskRunner | A class driving the execution of a QC task inside DPL |
Co2::quality_control::example::ExampleQualityPrinterSpec | Example DPL task to be plugged after a QC check |
Co2::quality_control_modules::ft0::FT0DataProducer | |
CTracksRootFileReaderMFT | |
►CTask | |
Co2::quality_control::checker::CheckRunner | The class in charge of running the checks on a MonitorObject |
Co2::quality_control::example::ExamplePrinterSpec | Example DPL task to be plugged after a QC task |
Co2::quality_control::postprocessing::PostProcessingDevice | A class driving the execution of a QC PostProcessing task inside DPL |
CReceiver | |
Co2::quality_control::core::TaskConfig | Container for the configuration of a Task |
Co2::quality_control::core::TaskFactory | Factory in charge of creating tasks |
►Co2::quality_control::core::TaskInterface | Skeleton of a QC task |
Co2::quality_control::test::TestTask | |
Co2::quality_control_modules::daq::DaqTask | Dataflow task It does only look at the header and plots sizes (e.g. payload). It also can print the headers and the payloads by setting printHeaders to "1" and printPayload to "hex" or "bin" in the config file under "taskParameters" |
Co2::quality_control_modules::emcal::DigitsQcTask | QC Task for EMCAL digits |
Co2::quality_control_modules::emcal::RawTask | Example Quality Control DPL Task It is final because there is no reason to derive from it. Just remove it if needed |
Co2::quality_control_modules::example::BenchmarkTask | Quality Control Task for benchmarking It publishes a number of TH1F (configurable, see example.ini in module QualityControl). The histos are reset and refilled (1000 random) at EOC. They have 1000 bins. The monitoring of data blocks is empty (sleep 100 ms) |
Co2::quality_control_modules::example::ExampleTask | Example Quality Control Task It is final because there is no reason to derive from it. Just remove it if needed |
Co2::quality_control_modules::ft0::BasicDigitQcTask | |
Co2::quality_control_modules::hmpid::HmpidTask | Example Quality Control DPL Task |
Co2::quality_control_modules::its::ITSClusterTask | |
Co2::quality_control_modules::its::ITSFeeTask | ITS FEE task aiming at 100% online data integrity checking |
Co2::quality_control_modules::its::ITSFhrTask | ITS Fake-hit rate real-time data processing task Working with the chain of "Detector -> RU -> CRU -> Readout -> STFB -> o2-dpl-raw-proxy -> QC" |
Co2::quality_control_modules::its::ITSRawTask | |
Co2::quality_control_modules::its::ITSTrackTask | |
Co2::quality_control_modules::mft::BasicClusterQcTask | MFT Cluster QC task |
Co2::quality_control_modules::mft::BasicDigitQcTask | MFT Digit QC task |
Co2::quality_control_modules::mft::BasicTrackQcTask | MFT Track QC task |
Co2::quality_control_modules::mid::RawQcTask | Count number of digits per detector elements |
Co2::quality_control_modules::muonchambers::PedestalsTask | Quality Control Task for the analysis of MCH pedestal data |
Co2::quality_control_modules::muonchambers::PhysicsTaskDigits | Quality Control Task for the analysis of MCH physics data |
Co2::quality_control_modules::muonchambers::PhysicsTaskPreclusters | Quality Control Task for the analysis of MCH physics data |
Co2::quality_control_modules::phos::DigitsQcTask | QC Task for PHOS digits |
Co2::quality_control_modules::phos::RawTask | PHOS Quality Control DPL Task |
Co2::quality_control_modules::skeleton::SkeletonTask | Example Quality Control DPL Task |
Co2::quality_control_modules::tof::TaskCompressedData | TOF Quality Control DPL Task for TOF Compressed data |
Co2::quality_control_modules::tof::TaskDiagnostics | TOF Quality Control DPL Task for TOF Compressed data |
Co2::quality_control_modules::tof::TaskDigits | TOF Quality Control DPL Task |
Co2::quality_control_modules::tpc::Clusters | Example Quality Control DPL Task It is final because there is no reason to derive from it. Just remove it if needed |
Co2::quality_control_modules::tpc::PID | TPC PID QC Task It is final because there is no reason to derive from it. Just remove it if needed |
Co2::quality_control_modules::tpc::Tracks | Quality Control DPL Task for QC Module TPC for track related observables |
Co2::quality_control::core::TaskRunnerFactory | Factory in charge of creating DataProcessorSpec of QC task |
►CTestCase | |
Ctest_Ccdb.TestCcdb | |
Ctest_repoCleaner.TestRepoCleaner | |
►CTH2F | |
Co2::quality_control_modules::muonchambers::GlobalHistogram | |
►CTObjArray | |
Co2::quality_control::core::MonitorObjectCollection | |
►CTObject | |
Co2::quality_control::core::MonitorObject | This class keeps the meta data about one published object |
Co2::quality_control::core::QualityObject | Encapsulation of a Quality into a TObject that can be streamed and stored |
Co2::quality_control::postprocessing::Trigger | |
Co2::quality_control::checker::UpdatePolicy | |
Co2::quality_control::checker::UpdatePolicyManager | |